簡介
本文說明如何將智慧許可配置恢復為傳統許可。
從智慧許可證恢復到傳統許可證沒有直接的步驟。本文包含還原許可證型別配置的解決方法。
狀況
運行12.0或更高版本的ESA，並啟用智慧許可(SL)。如果您想改回傳統/傳統許可(CL)，請按照解決方法部分中提到的步驟操作。
因應措施
警告：
1.將配置重置回所有初始/預設值。
2.這會影響生產，因此建議在執行此操作之前儲存配置檔案的副本（使用加密密碼）。
以下是用於還原更改的命令
(Machine cisco.com)> resetconfig
Are you sure you want to reset all configuration values? [N]> y
Machine cisco.com removed from the cluster.
All settings have been restored to the factory defaults.
附註：resetconfig命令僅在離線狀態下工作。
您必須掛起偵聽程式（如此處所述）才能執行resetconfig命令。
(Machine cisco.com)> suspend
Enter the number of seconds to wait before abruptly closing connections.
[30]>
Waiting for listeners to exit...
Receiving suspended for Test.
Waiting for outgoing deliveries to finish...
Mail delivery suspended.
(Machine cisco.com)>
或
(Machine esa.cisco.com)> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
- SERVICES - Service Utilities.
[]> reload
This command will remove all user settings and reset the entire device.
If this is a Virtual Appliance, all feature keys will be removed,
and the license must be reapplied.
Are you sure you want to continue? [N]> y
Are you *really* sure you want to continue? [N]> y
Do you want to wipe also? [N]>
Reverting to "virtualimage" preconfigure install mode.
Connection to x.x.x.x closed by remote host.
附註：請在TAC工程師的指南中執行上述更改。如果您遇到任何問題，可以立即聯絡TAC。
相關資訊
意見