简介
本文档介绍有关Catalyst 9000系列交换机无法正常引导并进入引导加载程序提示符的问题及解决方案。
问题
机箱2重新加载。原因是在1+1模式中选择主用/备用失败。
switch: boot
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
Both links down, not waiting for other switches
Switch number is 2
Chassis 2 reloading, reason - Active/standby selection failed in 1+1 Mode <<<<<<
Feb 19 20:06:55.572 FP0/0: %PMAN-5-EXITACTION: Process manager is exiting: reload fp action requested
Feb 19 20:06:57
Initializing Hardware...
System Bootstrap, Version 16.6.1r [FC1], RELEASE SOFTWARE (P)
Compiled Sat 07/15/2017 8:31:57.39 by rel
Current image running:
Primary Rommon Image
Last reset cause: SoftwareReload
C9300-48U platform with 8388608 Kbytes of main memory
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
确定此问题的另一种方式是在引导加载程序模式下使用set 命令查看STACK 1+1引导加载程序变量。要使交换机进入引导加载程序模式，请在交换机启动时单击mode 按钮。
switch: set
ABNORMAL_RESET_COUNT=0
AUTOREBOOT_RESTORE=1
BOARDID=20569
BOOT=flash:packages.conf
BSI=0
MAC_ADDR=00:ab:cd:ef:01
MANUAL_BOOT=yes
MODEL_NUM=C9300-48UXM
MODEL_REVISION_NUM=D0
MOTHERBOARD_ASSEMBLY_NUM=73-17959-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=XXXXXXXXXXX
RANDOM_NUM=1901228755
RET_2_RCALTS=
ROMMON_AUTOBOOT_ATTEMPT=3
STACK_1_1=2_0 <<<<<<<
SWITCH_IGNORE_STARTUP_CFG=1
SWITCH_NUMBER=2
SYSTEM_SERIAL_NUM=XXXXXXXXXXXX
TEMPLATE=access
VERSION_ID=V01
switch:
解决方案
取消设置堆栈1+1变量。之后，此交换机可以正常启动。
switch:unset STACK_1_1
switch: set
ABNORMAL_RESET_COUNT=0
AUTOREBOOT_RESTORE=1
BOARDID=20569
BOOT=flash:packages.conf
BSI=0
MAC_ADDR=00:ab:cd:ef:01
MANUAL_BOOT=yes
MODEL_NUM=C9300-48UXM
MODEL_REVISION_NUM=D0
MOTHERBOARD_ASSEMBLY_NUM=73-17959-06
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=XXXXXXXXXXX
RANDOM_NUM=1901228755
RET_2_RCALTS=
ROMMON_AUTOBOOT_ATTEMPT=3
SWITCH_IGNORE_STARTUP_CFG=1
SWITCH_NUMBER=2
SYSTEM_SERIAL_NUM=XXXXXXXXXX
TEMPLATE=access
VERSION_ID=V01
switch:
取消设置Stack 1+1引导加载程序变量后，请发出boot 命令，以便交换机可以从交换机上的引导变量集启动。
switch: boot
attempting to boot from [flash:packages.conf]
Located file packages.conf
#
##########################################################################################################################
Validate packages: SHA-1 hash:
calculated 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
expected 550C9730:667B2788:DD6F6B06:D0FFA819:01A315DA
Both links down, not waiting for other switches
Switch number is 2
相关信息
有关堆叠1+1模式的信息，请参阅1:1冗余。
反馈