Le VPN ad accesso remoto consentono ai singoli utenti di connettersi a un sito centrale tramite una connessione protetta su una rete TCP/IP, ad esempio Internet. I server VPN PPTP (Point-to-Point Tunneling Protocol) sono ideali per le applicazioni di accesso remoto, ma supportano anche l'internetworking LAN.
L'obiettivo di questo documento è mostrare come configurare un server VPN con il protocollo di tunneling point-to-point e come aggiungere nuovi utenti VPN PPTP sugli RV130 e RV130W.
RV130
RV130W
Nota: Prima di avviare il processo di configurazione del server PPTP, è consigliabile modificare l'indirizzo IP della rete locale dalle impostazioni predefinite. Le impostazioni predefinite probabilmente si sovrapporranno alla rete domestica del client, causando problemi di connettività. Se si sceglie questa opzione come predefinita, ogni volta che si aggiunge un utente verrà visualizzato un messaggio di errore. In questa guida, la rete verrà utilizzata come rete 10.0.0.0/24, con il router che utilizza l'indirizzo IP 10.0.0.1. Per ulteriori informazioni sulla modifica dell'indirizzo IP della rete, consultare il documento sulla configurazione della LAN IPv4 sulla RV130 e sulla RV130W.
Passaggio 1. Utilizzando l'utility di configurazione, scegliere VPN > Server PPTP. Viene visualizzata la pagina Server PPTP:
Passaggio 2. Nella sezione Configurazione PPTP, selezionare la casella di controllo Server PPTP abilitato.
Passaggio 3. Nel campo Indirizzo IP per il server PPTP, immettere l'indirizzo IP LAN dell'RV130 o RV130W.
Passaggio 4. Nel campo Indirizzo IP per client PPTP, immettere l'intervallo di indirizzi IP da assegnare agli utenti.
Passaggio 5. Selezionare la casella di controllo Abilita per Crittografia MPPE per crittografare i collegamenti point-to-point. MPPE (Microsoft Point-to-Point Encryption) non solo cripta i pacchetti PPP (Point-to-Point Protocol), ma utilizza anche un algoritmo di compressione per ottimizzare l'utilizzo della larghezza di banda e supportare più connessioni simultanee. Questa opzione può essere attivata o disattivata solo se si attiva il server PPTP.
Passaggio 1. Utilizzando l'utility di configurazione, scegliere VPN > Server PPTP. Viene visualizzata la pagina Server PPTP:
Passaggio 2. Nella tabella Account utente PPTP, fare clic su Aggiungi riga.
Passaggio 3. Selezionare la casella di controllo Abilita per il nuovo account utente.
Passaggio 4. Immettere un nome utente nel campo Nome utente e una password per l'utente nel campo Password.
Nota: Ripetere i passaggi da 2 a 4 per aggiungere altri account utente.
Passaggio 5. Fare clic su Save per applicare le modifiche.
Revisione | Data di pubblicazione | Commenti |
---|---|---|
1.0 |
10-Dec-2018 |
Versione iniziale |