Configuración de IPSec entre un router Cisco IOS y un Cisco VPN Client 4.x para Windows con RADIUS

Opciones de descarga

  • PDF     (723.1 KB)
    Visualice con Adobe Reader en una variedad de dispositivos
  • ePub     (605.7 KB)
    Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (725.6 KB)
    Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos
Actualizado:17 de octubre de 2019
ID del documento:20983

Lenguaje no discriminatorio

El conjunto de documentos para este producto aspira al uso de un lenguaje no discriminatorio. A los fines de esta documentación, "no discriminatorio" se refiere al lenguaje que no implica discriminación por motivos de edad, discapacidad, género, identidad de raza, identidad étnica, orientación sexual, nivel socioeconómico e interseccionalidad. Puede haber excepciones en la documentación debido al lenguaje que se encuentra ya en las interfaces de usuario del software del producto, el lenguaje utilizado en función de la documentación de la RFP o el lenguaje utilizado por un producto de terceros al que se hace referencia. Obtenga más información sobre cómo Cisco utiliza el lenguaje inclusivo.

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

    Introducción

    Este documento demuestra cómo configurar una conexión entre un router Cisco IOS y Cisco VPN Client 4.x mediante RADIUS para la autorización de grupo y la autenticación de usuario. La versión 12.2(8)T y posteriores de Cisco IOS® Software soportan conexiones de Cisco VPN Client 3.x. Los clientes VPN 3.x y 4.x utilizan la política Diffie Hellman (DH) group 2. El comando isakmp policy # group 2 permite conectarse a los clientes VPN.

    Nota: Ya está disponible IPSec VPN Accounting. Consulte Contabilización de VPN IPSec para obtener más información y configuraciones de ejemplo.

    Prerequisites

    Requirements

    Asegúrese de cumplir estos requisitos antes de intentar esta configuración:

    • Una agrupación de direcciones que se asignarán para IPSec
    • Un grupo llamado "3000clients" con una clave previamente compartida de "cisco123"
    • Autorización de grupo y autenticación de usuario en un servidor RADIUS

    Nota: RADIUS Accounting no se soporta en este momento.

    Componentes Utilizados

    La información que contiene este documento se basa en las siguientes versiones de software y hardware.

    • Router 2611 que ejecuta la versión 12.2(8)T del software del IOS de Cisco.
    • Cisco Secure ACS para Windows (cualquier servidor RADIUS debería funcionar).
    • Cisco VPN Client para Windows versión 4.8 (cualquier VPN Client 4.x debería funcionar).

    La información que contiene este documento se creó a partir de los dispositivos en un ambiente de laboratorio específico. Todos los dispositivos que se utilizan en este documento se pusieron en funcionamiento con una configuración verificada (predeterminada). If your network is live, make sure that you understand the potential impact of any command.

    Esto es resultado del comando show version en el router:

    vpn2611#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JK9O3S-M), Version 12.2(8)T,
   RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 14-Feb-02 16:50 by ccai
Image text-base: 0x80008070, data-base: 0x81816184

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

vpn2611 uptime is 1 hour, 15 minutes
System returned to ROM by reload
System image file is "flash:c2600-jk9o3s-mz.122-8.T"

cisco 2611 (MPC860) processor (revision 0x203) 
   with 61440K/4096K bytes of memory.
Processor board ID JAD04370EEG (2285146560)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

    Teoría Precedente

    Este documento muestra la autenticación y autorización, como la asignación de los Servicios de nombres Internet de Windows (WINS) y DNS (Servicio de nombres de dominio), por el servidor RADIUS. Si está interesado en realizar la autenticación por el servidor RADIUS y la autorización localmente por el router, consulte Configuración de IPSec entre un router Cisco IOS y un Cisco VPN Client 4.x para Windows que utiliza RADIUS para la autenticación de usuario.

    Configurar

    En esta sección encontrará la información para configurar las funciones descritas en este documento.

    Diagrama de la red

    En este documento, se utiliza esta configuración de red:

    Nota: las direcciones IP de esta red de ejemplo no son enrutables en Internet global porque son direcciones IP privadas en una red de laboratorio.

    Configuraciones

    Router 2611

    vpn2611#show run
Building configuration...

Current configuration : 1884 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname vpn2611
!

!--- Enable AAA for user authentication and group authorization.

aaa new-model
!

!--- In order to enable extended authentication (Xauth) for user authentication, 
    !--- enable the aaa authentication commands. 
    !--- "Group radius" specifies RADIUS user authentication.    
    
aaa authentication login userauthen group radius



!--- In order to enable group authorization, 
    !--- enable the aaa authorization commands.    
    
aaa authorization network groupauthor group radius 
!
!
ip subnet-zero
!
!
!
ip audit notify log
ip audit po max-events 100
!

!--- Create an Internet Security Association and 
    !--- Key Management Protocol (ISAKMP) policy for Phase 1 negotiations.    
    
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
!
!

!--- Create the Phase 2 policy for actual data encryption.

crypto ipsec transform-set myset esp-3des esp-sha-hmac
!


!--- Create a dynamic map and 
    !--- apply the transform set that was created.    
    
crypto dynamic-map dynmap 10
set transform-set myset
!

!--- Create the actual crypto map, 
    !--- and apply the AAA lists that were created earlier.    
    
crypto map clientmap client authentication list userauthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
!
!
fax interface-type fax-mail
mta receive maximum-recipients 0
!
!
!

!--- Apply the crypto map on the outside interface.

interface Ethernet0/0

ip address 10.1.1.1 255.255.255.0
 half-duplex
 crypto map clientmap
!
interface Serial0/0
 no ip address
 shutdown
!
interface Ethernet0/1
 ip address 172.18.124.159 255.255.255.0
 no keepalive
 half-duplex
!


!--- Create a pool of addresses to be assigned to the VPN Clients.

ip local pool ippool 10.16.20.1 10.16.20.200
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.1.2
ip http server
ip pim bidir-enable
!

!--- Create an access control list (ACL) if you want to do split tunneling. 
    !--- This ACL is referenced in the RADIUS profile.    
    

access-list 108 permit ip 172.18.124.0 0.0.255.255 10.16.20.0 0.0.0.255
!

!--- Specify the IP address of the RADIUS server, 
    !--- along with the RADIUS shared secret key.    
    

radius-server host 172.18.124.96 auth-port 1645 acct-port 1646 key cisco123
radius-server retransmit 3
call rsvp-sync
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
!
!
line con 0
 exec-timeout 0 0
line aux 0
line vty 0 4
!
!
end

vpn2611#

    Configuración del servidor de RADIUS

    Configuración del servidor RADIUS para clientes AAA (router)

    Complete estos pasos:

    1. Haga clic en Add Entry para agregar el router a la base de datos del servidor RADIUS.

    2. Especifique la dirección IP del router "172.18.124.159" junto con la clave secreta compartida "cisco123" y elija RADIUS en el cuadro desplegable Autenticar mediante.

    Configuración del servidor RADIUS para autenticación y autorización de grupo

    Complete estos pasos:

    1. Haga clic en Add/Edit para agregar un usuario llamado 3000client al servidor RADIUS.

    2. Antes de Cisco IOS Software Release 15.8.3 y Cisco IOS XE Software Release 16.9.1, esta contraseña era una palabra clave especial para Cisco IOS, que indica que se debe hacer referencia a un perfil de grupo. Si lo prefiere, puede asignar el usuario a un grupo de Cisco Secure. Asegúrese de que no se ha seleccionado ninguna asignación de dirección IP.

      Después de Cisco IOS Software Release 15.8.3 y Cisco IOS XE Software Release 16.9.1, la autorización AAA necesita una contraseña y es obligatoria. Se recomienda definir la contraseña utilizada a través del comando isakmp authorization list aaa_list1 password <secret>.

      El administrador configuraría la contraseña <secret> coincidente en el servidor RADIUS.

    3. Especifique los parámetros de autorización de grupo que esta cuenta de usuario transmitirá de nuevo al cliente VPN.

      Asegúrese de tener cisco-av-pair habilitado con estos atributos:

      • ipsec:key-exchange=ike
      • ipsec:key-exchange=clave previamente compartida
      • ipsec:addr-pool=ippool
      • ipsec:inacl=108 (sólo es necesario si utiliza la tunelización dividida en el router)

      Además, asegúrese de que tiene estos atributos RADIUS IETF habilitados:

      • Atributo 6: Service-Type=Saliente
      • Atributo 64: Tunnel-Type=IP ESP
      • Atributo 69: Tunnel-Password=cisco123 (contraseña de grupo en el cliente VPN)

      Una vez que haya terminado, haga clic en Submit.

      En Atributos específicos del proveedor, también puede habilitar estos atributos opcionales:

      • ipsec:default-domain=
      • ipsec:timeout=
      • ipsec:idletime=
      • ipsec:dns-servers=
      • ipsec:wins-servers=

    Configuración del Servidor RADIUS para la Autenticación de Usuario

    Complete estos pasos:

    1. Haga clic en Add/Edit para agregar el usuario VPN en la base de datos de Cisco Secure.

      En este ejemplo, el nombre de usuario es cisco.

    2. En la siguiente ventana, especifique la contraseña para el usuario cisco. La contraseña también es cisco.

      Puede asignar la cuenta de usuario a un grupo. Una vez que haya terminado, haga clic en Submit.

    Configuración de VPN Client 4.8

    Complete estos pasos para configurar VPN Client 4.8:

    1. Elija Inicio > Programas > Cisco Systems VPN Client > VPN Client.
    2. Haga clic en New para iniciar la ventana Create New VPN Connection Entry.

    3. Introduzca el nombre de la entrada de conexión junto con una descripción. Introduzca la dirección IP externa del router en el cuadro Host. A continuación, introduzca el nombre y la contraseña del grupo VPN y haga clic en Save.

    4. Haga clic en la conexión que desea utilizar y haga clic en Connect en la ventana principal de VPN Client.

    5. Cuando aparezca el mensaje, ingrese la información de su nombre de usuario y contraseña para Xauth y haga clic en OK (Aceptar) para conectarse a la red remota.

      El cliente VPN se conecta con el router en el sitio central.

    Verificación

    Use esta sección para confirmar que su configuración funciona correctamente.

    vpn2611#show crypto isakmp sa
dst             src             state           conn-id    slot
10.1.1.1  10.0.0.1   QM_IDLE               3       0


vpn2611#show crypto ipsec sa interface: Ethernet0/0
    Crypto map tag: clientmap, local addr. 10.1.1.1

   local  ident (addr/mask/prot/port): (10.1.1.1/255.255.255.255/0/0)
   remote ident (addr/mask/prot/port): (10.16.20.2/255.255.255.255/0/0)
   current_peer: 10.0.0.1
     PERMIT, flags={}
  #pkts encaps: 5, #pkts encrypt: 5, #pkts digest 5
    #pkts decaps: 5, #pkts decrypt: 5, #pkts verify 5
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 10.1.1.1, remote crypto endpt.: 10.0.0.1
     path mtu 1500, media mtu 1500
     current outbound spi: 77AFCCFA

     inbound esp sas:
      spi: 0xC7AC22AB(3349947051)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2000, flow_id: 1, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4608000/3444)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x77AFCCFA(2008009978)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2001, flow_id: 2, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4608000/3444)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:


   local  ident (addr/mask/prot/port): (172.18.124.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (10.16.20.2/255.255.255.255/0/0)
   current_peer: 10.0.0.1
     PERMIT, flags={}
  #pkts encaps: 4, #pkts encrypt: 4, #pkts digest 4
    #pkts decaps: 6, #pkts decrypt: 6, #pkts verify 6
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 10.1.1.1, remote crypto endpt.: 10.0.0.1
     path mtu 1500, media mtu 1500
     current outbound spi: 2EE5BF09

     inbound esp sas:
      spi: 0x3565451F(895829279)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2002, flow_id: 3, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4607999/3469)
        IV size: 8 bytes
        replay detection support: Y

     inbound ah sas:
          
     inbound pcp sas:

     outbound esp sas:
      spi: 0x2EE5BF09(786808585)
        transform: esp-3des esp-sha-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2003, flow_id: 4, crypto map: clientmap
        sa timing: remaining key lifetime (k/sec): (4607999/3469)
        IV size: 8 bytes
        replay detection support: Y

     outbound ah sas:

     outbound pcp sas:


vpn2611#show crypto engine connections active
  ID Interface       IP-Address      State  Algorithm           Encrypt  Decrypt
   3 Ethernet0/0     10.1.1.1  set    HMAC_SHA+3DES_56_C        0        0
2000 Ethernet0/0     10.1.1.1  set    HMAC_SHA+3DES_56_C        0        5
2001 Ethernet0/0     10.1.1.1  set    HMAC_SHA+3DES_56_C        5        0
2002 Ethernet0/0     10.1.1.1  set    HMAC_SHA+3DES_56_C        0        6
2003 Ethernet0/0     10.1.1.1  set    HMAC_SHA+3DES_56_C        4        0

    Troubleshoot

    Use esta sección para resolver problemas de configuración.

    Comandos para resolución de problemas

    Consulte Información Importante sobre Comandos de Debug antes de usar un comando debug.

    • debug crypto ipsec—Muestra información de depuración acerca de las conexiones IPSec.
    • debug crypto isakmp: muestra información de depuración sobre las conexiones IPSec y muestra el primer conjunto de atributos que se deniegan debido a incompatibilidades en ambos extremos.
    • debug crypto engine — Muestra información del motor de criptografía.
    • debug aaa authentication — Muestra información sobre autenticación de AAA/TACACS+.
    • debug aaa authorization radius—Muestra información sobre la autorización AAA/TACACS+.
    • debug radius: muestra información sobre la solución de problemas de comunicación entre el servidor RADIUS y el router.

    ‘Resultado de debug’

    En esta sección encontrará información de depuración del router que también puede utilizar para solucionar los problemas de su configuración.

    Registros de router

    vpn2611#show debug
General OS:
AAA Authorization debugging is on
Radius protocol debugging is on
Radius packet protocol debugging is on

Cryptographic Subsystem:
Crypto ISAKMP debugging is on
Crypto IPSEC debugging is on
vpn2611#

1w0d: ISAKMP (0:0): received packet from 10.0.0.1 (N) NEW SA
1w0d: ISAKMP: local port 500, remote port 500
1w0d: ISAKMP (0:2): (Re)Setting client xauth list userauthen and state
1w0d: ISAKMP: Locking CONFIG struct 0x830BF118 from 
crypto_ikmp_config_initialize_sa, count 2
1w0d: ISAKMP (0:2): processing SA payload. message ID = 0
1w0d: ISAKMP (0:2): processing ID payload. message ID = 0
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: ISAKMP (0:2): vendor ID seems Unity/DPD but bad major
1w0d: ISAKMP (0:2): vendor ID is XAUTH
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: ISAKMP (0:2): vendor ID is DPD
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: ISAKMP (0:2): vendor ID is Unity
1w0d: ISAKMP (0:2): Checking ISAKMP transform 1 against priority 3 policy
1w0d: ISAKMP: encryption 3DES-CBC
1w0d: ISAKMP: hash SHA
1w0d: ISAKMP: default group 2
1w0d: ISAKMP: auth XAUTHInitPreShared
1w0d: ISAKMP: life type in seconds
1w0d: ISAKMP: life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: ISAKMP (0:2): atts are acceptable. Next payload is 3
1w0d: ISAKMP (0:2): processing KE payload. message ID = 0
1w0d: ISAKMP (0:2): processing NONCE payload. message ID = 0
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: ISAKMP (0:2): processing vendor id payload
1w0d: AAA: parse name=ISAKMP-ID-AUTH idb type=-1 tty=-1
1w0d: AAA/MEMORY: create_user (0x830CAF28) user='3000client' ruser='NULL' 
ds0=0 port='ISAKMP-ID-AUTH' rem_addr='10.0.0.1' authen_type=NONE 
service=LOGIN priv=0 initial_task_id='0'
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
Old State = IKE_READY New State = IKE_R_AM_AAA_AWAIT 

1w0d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(66832552): 
Port='ISAKMP-ID-AUTH' list='groupauthor' service=NET
1w0d: AAA/AUTHOR/CRYPTO AAA: ISAKMP-ID-AUTH(66832552) user='3000client'
1w0d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(66832552): send AV service=ike
1w0d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(66832552): send AV 
protocol=ipsec
1w0d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(66832552): found list 
"groupauthor"
1w0d: ISAKMP-ID-AUTH AAA/AUTHOR/CRYPTO AAA(66832552): Method=radius 
(radius)
1w0d: RADIUS: authenticating to get author data
1w0d: RADIUS: ustruct sharecount=3
1w0d: Radius: radius_port_info() success=0 radius_nas_port=1
1w0d: RADIUS: Send to ISAKMP-ID-AUTH id 60 172.18.124.96:1645, 
Access-Request, len 83
1w0d: RADIUS: authenticator AF EC D3 AD D6 39 4F 7D - A0 5E FC 64 F5 DE 
A7 3B
1w0d: RADIUS: NAS-IP-Address [4] 6 172.18.124.159 
1w0d: RADIUS: NAS-Port-Type [61] 6 Async [0]
1w0d: RADIUS: User-Name [1] 12 "3000client"
1w0d: RADIUS: Calling-Station-Id [31] 15 "10.0.0.1"
1w0d: RADIUS: User-Password [2] 18 *
1w0d: RADIUS: Service-Type [6] 6 Outbound [5]
1w0d: RADIUS: Received from id 60 172.18.124.96:1645, Access-Accept, len 
176
1w0d: RADIUS: authenticator 52 BA 0A 38 AC C2 2B 6F - A0 77 64 93 D6 19 
78 CF
1w0d: RADIUS: Service-Type [6] 6 Outbound [5]
1w0d: RADIUS: Vendor, Cisco [26] 30 
1w0d: RADIUS: Cisco AVpair [1] 24 "ipsec:key-exchange=ike"
1w0d: RADIUS: Vendor, Cisco [26] 40 
1w0d: RADIUS: Cisco AVpair [1] 34 "ipsec:key-exchange=preshared-key"
1w0d: RADIUS: Vendor, Cisco [26] 30 
1w0d: RADIUS: Cisco AVpair [1] 24 "ipsec:addr-pool=ippool"
1w0d: RADIUS: Vendor, Cisco [26] 23 
1w0d: RADIUS: Cisco AVpair [1] 17 "ipsec:inacl=108"
1w0d: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
1w0d: RADIUS: Tunnel-Password [69] 21 *
1w0d: RADIUS: saved authorization data for user 830CAF28 at 83198648
1w0d: RADIUS: cisco AVPair "ipsec:key-exchange=ike"
1w0d: RADIUS: cisco AVPair "ipsec:key-exchange=preshared-key"
1w0d: RADIUS: cisco AVPair "ipsec:addr-pool=ippool"
1w0d: RADIUS: cisco AVPair "ipsec:inacl=108"
1w0d: RADIUS: Tunnel-Type, [01] 00 00 09
1w0d: RADIUS: TAS(1) created and enqueued.
1w0d: RADIUS: Tunnel-Password decrypted, [01] cisco123
1w0d: RADIUS: TAS(1) takes precedence over tagged attributes, 
tunnel_type=esp
1w0d: RADIUS: free TAS(1)
1w0d: AAA/AUTHOR (66832552): Post authorization status = PASS_REPL
1w0d: ISAKMP: got callback 1
AAA/AUTHOR/IKE: Processing AV key-exchange=ike
AAA/AUTHOR/IKE: Processing AV key-exchange=preshared-key
AAA/AUTHOR/IKE: Processing AV addr-pool=ippool
AAA/AUTHOR/IKE: Processing AV inacl=108
AAA/AUTHOR/IKE: Processing AV tunnel-type*esp
AAA/AUTHOR/IKE: Processing AV tunnel-password=cisco123
AAA/AUTHOR/IKE: Processing AV tunnel-tag*1
1w0d: ISAKMP (0:2): SKEYID state generated
1w0d: ISAKMP (0:2): SA is doing pre-shared key authentication plux XAUTH 
using id type ID_IPV4_ADDR
1w0d: ISAKMP (2): ID payload
next-payload : 10
type : 1
protocol : 17
port : 500
length : 8
1w0d: ISAKMP (2): Total payload length: 12
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) AG_INIT_EXCH
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, PRESHARED_KEY_REPLY
Old State = IKE_R_AM_AAA_AWAIT New State = IKE_R_AM2 

1w0d: AAA/MEMORY: free_user (0x830CAF28) user='3000client' ruser='NULL' 
port='ISAKMP-ID-AUTH' rem_addr='10.0.0.1' authen_type=NONE 
service=LOGIN priv=0
1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) AG_INIT_EXCH
1w0d: ISAKMP (0:2): processing HASH payload. message ID = 0
1w0d: ISAKMP (0:2): processing NOTIFY INITIAL_CONTACT protocol 1
spi 0, message ID = 0, sa = 831938B0
1w0d: ISAKMP (0:2): Process initial contact, bring down existing phase 1 
and 2 SA's
1w0d: ISAKMP (0:2): returning IP addr to the address pool: 10.16.20.1
1w0d: ISAKMP (0:2): returning address 10.16.20.1 to pool
1w0d: ISAKMP (0:2): peer does not do paranoid keepalives.

1w0d: ISAKMP (0:2): SA has been authenticated with 10.0.0.1
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): purging node -1377537628
1w0d: ISAKMP: Sending phase 1 responder lifetime 86400

1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_AM_EXCH
Old State = IKE_R_AM2 New State = IKE_P1_COMPLETE 

1w0d: IPSEC(key_engine): got a queue event...
1w0d: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP
1w0d: IPSEC(key_engine_delete_sas): delete all SAs shared with 
10.0.0.1 
1w0d: ISAKMP (0:2): Need XAUTH
1w0d: AAA: parse name=ISAKMP idb type=-1 tty=-1
1w0d: AAA/MEMORY: create_user (0x830CAF28) user='NULL' ruser='NULL' ds0=0 
port='ISAKMP' rem_addr='10.0.0.1' authen_type=ASCII service=LOGIN 
priv=0 initial_task_id='0'
1w0d: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
Old State = IKE_P1_COMPLETE New State = IKE_XAUTH_AAA_START_LOGIN_AWAIT 

1w0d: ISAKMP: got callback 1
1w0d: ISAKMP/xauth: request attribute XAUTH_TYPE_V2
1w0d: ISAKMP/xauth: request attribute XAUTH_MESSAGE_V2
1w0d: ISAKMP/xauth: request attribute XAUTH_USER_NAME_V2
1w0d: ISAKMP/xauth: request attribute XAUTH_USER_PASSWORD_V2
1w0d: ISAKMP (0:2): initiating peer config to 10.0.0.1. ID = 
-1021889193
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) CONF_XAUTH 
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_START_LOGIN
Old State = IKE_XAUTH_AAA_START_LOGIN_AWAIT New State = 
IKE_XAUTH_REQ_SENT 

1w0d: ISAKMP (0:1): purging node 832238598
1w0d: ISAKMP (0:1): purging node 1913225491
1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) CONF_XAUTH 
1w0d: ISAKMP (0:2): processing transaction payload from 10.0.0.1. 
message ID = -1021889193
1w0d: ISAKMP: Config payload REPLY
1w0d: ISAKMP/xauth: reply attribute XAUTH_TYPE_V2 unexpected
1w0d: ISAKMP/xauth: reply attribute XAUTH_USER_NAME_V2
1w0d: ISAKMP/xauth: reply attribute XAUTH_USER_PASSWORD_V2
1w0d: ISAKMP (0:2): deleting node -1021889193 error FALSE reason "done 
with xauth request/reply exchange"
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_REPLY
Old State = IKE_XAUTH_REQ_SENT New State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT 

1w0d: RADIUS: ustruct sharecount=2
1w0d: Radius: radius_port_info() success=0 radius_nas_port=1
1w0d: RADIUS: Send to ISAKMP id 61 172.18.124.96:1645, Access-Request, len 72
1w0d: RADIUS: authenticator 98 12 4F C0 DA B9 48 B8 - 58 00 BA 14 08 8E 
87 C0
1w0d: RADIUS: NAS-IP-Address [4] 6 172.18.124.159 
1w0d: RADIUS: NAS-Port-Type [61] 6 Async [0]
1w0d: RADIUS: User-Name [1] 7 "cisco"
1w0d: RADIUS: Calling-Station-Id [31] 15 "10.0.0.1"
1w0d: RADIUS: User-Password [2] 18 *
1w0d: RADIUS: Received from id 61 172.18.124.96:1645, Access-Accept, len 26
1w0d: RADIUS: authenticator 00 03 F4 E1 9C 61 3F 03 - 54 83 E8 27 5C 6A 
7B 6E
1w0d: RADIUS: Framed-IP-Address [8] 6 255.255.255.255 
1w0d: RADIUS: saved authorization data for user 830CAF28 at 830F89F8
1w0d: ISAKMP: got callback 1
1w0d: ISAKMP (0:2): initiating peer config to 10.0.0.1. ID = 
-547189328
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) CONF_XAUTH 
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN
Old State = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT New State = IKE_XAUTH_SET_SENT 

1w0d: AAA/MEMORY: free_user (0x830CAF28) user='cisco' ruser='NULL' 
port='ISAKMP' rem_addr='10.0.0.1' authen_type=ASCII service=LOGIN 
priv=0
1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) CONF_XAUTH 
1w0d: ISAKMP (0:2): processing transaction payload from 10.0.0.1. 
message ID = -547189328
1w0d: ISAKMP: Config payload ACK
1w0d: ISAKMP (0:2): XAUTH ACK Processed
1w0d: ISAKMP (0:2): deleting node -547189328 error FALSE reason "done with 
transaction"
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_ACK
Old State = IKE_XAUTH_SET_SENT New State = IKE_P1_COMPLETE 

1w0d: ISAKMP (0:2): Input = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
Old State = IKE_P1_COMPLETE New State = IKE_P1_COMPLETE 

1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): processing transaction payload from 10.0.0.1. 
message ID = -1911189201
1w0d: ISAKMP: Config payload REQUEST
1w0d: ISAKMP (0:2): checking request:
1w0d: ISAKMP: IP4_ADDRESS
1w0d: ISAKMP: IP4_NETMASK
1w0d: ISAKMP: IP4_DNS
1w0d: ISAKMP: IP4_NBNS
1w0d: ISAKMP: ADDRESS_EXPIRY
1w0d: ISAKMP: APPLICATION_VERSION
1w0d: ISAKMP: UNKNOWN Unknown Attr: 0x7000
1w0d: ISAKMP: UNKNOWN Unknown Attr: 0x7001
1w0d: ISAKMP: DEFAULT_DOMAIN
1w0d: ISAKMP: SPLIT_INCLUDE
1w0d: ISAKMP: UNKNOWN Unknown Attr: 0x7007
1w0d: ISAKMP: UNKNOWN Unknown Attr: 0x7008
1w0d: ISAKMP: UNKNOWN Unknown Attr: 0x7005
1w0d: AAA: parse name=ISAKMP-GROUP-AUTH idb type=-1 tty=-1
1w0d: AAA/MEMORY: create_user (0x830CAF28) user='3000client' ruser='NULL' 
ds0=0 port='ISAKMP-GROUP-AUTH' rem_addr='10.0.0.1' authen_type=NONE 
service=LOGIN priv=0 initial_task_id='0'
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST
Old State = IKE_P1_COMPLETE New State = IKE_CONFIG_AUTHOR_AAA_AWAIT 

1w0d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(3098118746): 
Port='ISAKMP-GROUP-AUTH' list='groupauthor' service=NET
1w0d: AAA/AUTHOR/CRYPTO AAA: ISAKMP-GROUP-AUTH(3098118746) 
user='3000client'
1w0d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(3098118746): send AV 
service=ike
1w0d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(3098118746): send AV 
protocol=ipsec
1w0d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(3098118746): found list 
"groupauthor"
1w0d: ISAKMP-GROUP-AUTH AAA/AUTHOR/CRYPTO AAA(3098118746): Method=radius 
(radius)
1w0d: RADIUS: authenticating to get author data
1w0d: RADIUS: ustruct sharecount=3
1w0d: Radius: radius_port_info() success=0 radius_nas_port=1
1w0d: RADIUS: Send to ISAKMP-GROUP-AUTH id 62 172.18.124.96:1645, 
Access-Request, len 83
1w0d: RADIUS: authenticator 32 C5 32 FF AB B7 E4 68 - 9A 68 5A DE D5 56 
0C BE
1w0d: RADIUS: NAS-IP-Address [4] 6 172.18.124.159 
1w0d: RADIUS: NAS-Port-Type [61] 6 Async [0]
1w0d: RADIUS: User-Name [1] 12 "3000client"
1w0d: RADIUS: Calling-Station-Id [31] 15 "10.0.0.1"
1w0d: RADIUS: User-Password [2] 18 *
1w0d: RADIUS: Service-Type [6] 6 Outbound [5]
1w0d: RADIUS: Received from id 62 172.18.124.96:1645, Access-Accept, len 
176
1w0d: RADIUS: authenticator DF FA FE 21 07 92 4F 10 - 75 5E D6 96 66 70 
19 27
1w0d: RADIUS: Service-Type [6] 6 Outbound [5]
1w0d: RADIUS: Vendor, Cisco [26] 30 
1w0d: RADIUS: Cisco AVpair [1] 24 "ipsec:key-exchange=ike"
1w0d: RADIUS: Vendor, Cisco [26] 40 
1w0d: RADIUS: Cisco AVpair [1] 34 
"ipsec:key-exchange=preshared-key"
1w0d: RADIUS: Vendor, Cisco [26] 30 
1w0d: RADIUS: Cisco AVpair [1] 24 "ipsec:addr-pool=ippool"
1w0d: RADIUS: Vendor, Cisco [26] 23 
1w0d: RADIUS: Cisco AVpair [1] 17 "ipsec:inacl=108"
1w0d: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
1w0d: RADIUS: Tunnel-Password [69] 21 *
1w0d: RADIUS: saved authorization data for user 830CAF28 at 83143E64
1w0d: RADIUS: cisco AVPair "ipsec:key-exchange=ike"
1w0d: RADIUS: cisco AVPair "ipsec:key-exchange=preshared-key"
1w0d: RADIUS: cisco AVPair "ipsec:addr-pool=ippool"
1w0d: RADIUS: cisco AVPair "ipsec:inacl=108"
1w0d: RADIUS: Tunnel-Type, [01] 00 00 09
1w0d: RADIUS: TAS(1) created and enqueued.
1w0d: RADIUS: Tunnel-Password decrypted, [01] cisco123
1w0d: RADIUS: TAS(1) takes precedence over tagged attributes, 
tunnel_type=esp
1w0d: RADIUS: free TAS(1)
1w0d: AAA/AUTHOR (3098118746): Post authorization status = PASS_REPL
1w0d: ISAKMP: got callback 1
AAA/AUTHOR/IKE: Processing AV key-exchange=ike
AAA/AUTHOR/IKE: Processing AV key-exchange=preshared-key
AAA/AUTHOR/IKE: Processing AV addr-pool=ippool
AAA/AUTHOR/IKE: Processing AV inacl=108
AAA/AUTHOR/IKE: Processing AV tunnel-type*esp
AAA/AUTHOR/IKE: Processing AV tunnel-password=cisco123
AAA/AUTHOR/IKE: Processing AV tunnel-tag*1
1w0d: ISAKMP (0:2): attributes sent in message:
1w0d: Address: 0.2.0.0
1w0d: ISAKMP (0:2): allocating address 10.16.20.2
1w0d: ISAKMP: Sending private address: 10.16.20.2
1w0d: ISAKMP: Unknown Attr: IP4_NETMASK (0x2)
1w0d: ISAKMP: Sending ADDRESS_EXPIRY seconds left to use the address: 
86395
1w0d: ISAKMP: Sending APPLICATION_VERSION string: Cisco Internetwork 
Operating System Software 
IOS (tm) C2600 Software (C2600-JK9O3S-M), Version 12.2(8)T, RELEASE 
SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 14-Feb-02 16:50 by ccai
1w0d: ISAKMP: Unknown Attr: UNKNOWN (0x7000)
1w0d: ISAKMP: Unknown Attr: UNKNOWN (0x7001)
1w0d: ISAKMP: Sending split include name 108 network 14.38.0.0 mask 
255.255.0.0 protocol 0, src port 0, dst port 0

1w0d: ISAKMP: Unknown Attr: UNKNOWN (0x7007)
1w0d: ISAKMP: Unknown Attr: UNKNOWN (0x7008)
1w0d: ISAKMP: Unknown Attr: UNKNOWN (0x7005)
1w0d: ISAKMP (0:2): responding to peer config from 10.0.0.1. ID = 
-1911189201
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) CONF_ADDR 
1w0d: ISAKMP (0:2): deleting node -1911189201 error FALSE reason ""
1w0d: ISAKMP (0:2): Input = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR
Old State = IKE_CONFIG_AUTHOR_AAA_AWAIT New State = IKE_P1_COMPLETE 

1w0d: AAA/MEMORY: free_user (0x830CAF28) user='3000client' ruser='NULL' 
port='ISAKMP-GROUP-AUTH' rem_addr='10.0.0.1' authen_type=NONE 
service=LOGIN priv=0
1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): processing HASH payload. message ID = 132557281
1w0d: ISAKMP (0:2): processing SA payload. message ID = 132557281
1w0d: ISAKMP (0:2): Checking IPSec proposal 1
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-MD5
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, 
hmac_alg 1) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): skipping next ANDed proposal (1)
1w0d: ISAKMP (0:2): Checking IPSec proposal 2
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-SHA
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: ISAKMP (0:2): atts are acceptable.
1w0d: ISAKMP (0:2): Checking IPSec proposal 2
1w0d: ISAKMP (0:2): transform 1, IPPCP LZS
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 4, trans 3, 
hmac_alg 0) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): Checking IPSec proposal 3
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-MD5
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, 
hmac_alg 1) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): Checking IPSec proposal 4
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-SHA
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: ISAKMP (0:2): atts are acceptable.
1w0d: IPSEC(validate_proposal_request): proposal part #1,
(key eng. msg.) INBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 10.1.1.1/255.255.255.255/0/0 (type=1), 
remote_proxy= 10.16.20.2/255.255.255.255/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac , 
lifedur= 0s and 0kb, 
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
1w0d: ISAKMP (0:2): processing NONCE payload. message ID = 132557281
1w0d: ISAKMP (0:2): processing ID payload. message ID = 132557281
1w0d: ISAKMP (0:2): processing ID payload. message ID = 132557281
1w0d: ISAKMP (0:2): asking for 1 spis from ipsec
1w0d: ISAKMP (0:2): Node 132557281, Input = IKE_MESG_FROM_PEER, 
IKE_QM_EXCH
Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE 

1w0d: IPSEC(key_engine): got a queue event...
1w0d: IPSEC(spi_response): getting spi 245824456 for SA 
from 10.1.1.1 to 10.0.0.1 for prot 3
1w0d: ISAKMP: received ke message (2/1)
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): Node 132557281, Input = IKE_MESG_FROM_IPSEC, 
IKE_SPI_REPLY
Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 

1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): Creating IPSec SAs
1w0d: inbound SA from 10.0.0.1 to 10.1.1.1
(proxy 10.16.20.2 to 10.1.1.1)
1w0d: has spi 0xEA6FBC8 and conn_id 2000 and flags 4
1w0d: lifetime of 2147483 seconds
1w0d: outbound SA from 10.1.1.1 to 10.0.0.1 (proxy 
10.1.1.1 to 10.16.20.2 )
1w0d: has spi 1009463339 and conn_id 2001 and flags C
1w0d: lifetime of 2147483 seconds
1w0d: ISAKMP (0:2): deleting node 132557281 error FALSE reason "quick mode 
done (await()"
1w0d: ISAKMP (0:2): Node 132557281, Input = IKE_MESG_FROM_PEER, 
IKE_QM_EXCH
Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE 

1w0d: IPSEC(key_engine): got a queue event...
1w0d: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 10.1.1.1/0.0.0.0/0/0 (type=1), 
remote_proxy= 10.16.20.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac , 
lifedur= 2147483s and 0kb, 
spi= 0xEA6FBC8(245824456), conn_id= 2000, keysize= 0, flags= 0x4
1w0d: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 10.1.1.1/0.0.0.0/0/0 (type=1), 
remote_proxy= 10.16.20.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac , 
lifedur= 2147483s and 0kb, 
spi= 0x3C2B302B(1009463339), conn_id= 2001, keysize= 0, flags= 0xC
1w0d: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.1.1.1, sa_prot= 50, 
sa_spi= 0xEA6FBC8(245824456), 
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2000
1w0d: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.0.0.1, sa_prot= 50, 
sa_spi= 0x3C2B302B(1009463339), 
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2001
1w0d: ISAKMP: received ke message (4/1)
1w0d: ISAKMP: Locking CONFIG struct 0x830BF118 for 
crypto_ikmp_config_handle_kei_mess, count 3
1w0d: ISAKMP (0:1): purging SA., sa=83196748, delme=83196748
1w0d: ISAKMP: Unlocking CONFIG struct 0x830BF118 on return of attributes, 
count 2
1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): processing HASH payload. message ID = -1273332908
1w0d: ISAKMP (0:2): processing SA payload. message ID = -1273332908
1w0d: ISAKMP (0:2): Checking IPSec proposal 1
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-MD5
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, 
hmac_alg 1) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): skipping next ANDed proposal (1)
1w0d: ISAKMP (0:2): Checking IPSec proposal 2
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-SHA
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: ISAKMP (0:2): atts are acceptable.
1w0d: ISAKMP (0:2): Checking IPSec proposal 2
1w0d: ISAKMP (0:2): transform 1, IPPCP LZS
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 4, trans 3, 
hmac_alg 0) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): Checking IPSec proposal 3
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-MD5
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: IPSEC(validate_proposal): transform proposal (prot 3, trans 3, 
hmac_alg 1) not supported
1w0d: ISAKMP (0:2): atts not acceptable. Next payload is 0
1w0d: ISAKMP (0:2): Checking IPSec proposal 4
1w0d: ISAKMP: transform 1, ESP_3DES
1w0d: ISAKMP: attributes in transform:
1w0d: ISAKMP: authenticator is HMAC-SHA
1w0d: ISAKMP: encaps is 1
1w0d: ISAKMP: SA life type in seconds
1w0d: ISAKMP: SA life duration (VPI) of 0x0 0x20 0xC4 0x9B 
1w0d: ISAKMP (0:2): atts are acceptable.
1w0d: IPSEC(validate_proposal_request): proposal part #
vpn2611#1,
(key eng. msg.) INBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 14.38.0.0/255.255.0.0/0/0 (type=4), 
remote_proxy= 10.16.20.2/255.255.255.255/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac , 
lifedur= 0s and 0kb, 
spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4
1w0d: ISAKMP (0:2): processing NONCE payload. message ID = -1273332908
1w0d: ISAKMP (0:2): processing ID payload. message ID = -1273332908
1w0d: ISAKMP (0:2): processing ID payload. message ID = -1273332908
1w0d: ISAKMP (0:2): asking for 1 spis from ipsec
1w0d: ISAKMP (0:2): Node -1273332908, Input = IKE_MESG_FROM_PEER, 
IKE_QM_EXCH
Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE 

1w0d: IPSEC(key_engine): got a queue event...
1w0d: IPSEC(spi_response): getting spi 593097454 for SA 
from 10.1.1.1 to 10.0.0.1
vpn2611#
vpn2611#2 for prot 3
1w0d: ISAKMP: received ke message (2/1)
1w0d: ISAKMP (0:2): sending packet to 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): Node -1273332908, Input = IKE_MESG_FROM_IPSEC, 
IKE_SPI_REPLY
Old State = IKE_QM_SPI_STARVE New State = IKE_QM_R_QM2 

1w0d: ISAKMP (0:2): received packet from 10.0.0.1 (R) QM_IDLE 
1w0d: ISAKMP (0:2): Creating IPSec SAs
1w0d: inbound SA from 10.0.0.1 to 10.1.1.1
(proxy 10.16.20.2 to 14.38.0.0)
1w0d: has spi 0x2359F2EE and conn_id 2002 and flags 4
1w0d: lifetime of 2147483 seconds
1w0d: outbound SA from 10.1.1.1 to 10.0.0.1 (proxy 
14.38.0.0 to 10.16.20.2 )
1w0d: has spi 1123818858 and conn_id 2003 and flags C
1w0d: lifetime of 2147483 seconds
1w0d: ISAKMP (0:2): deleting node -1273332908 erro
vpn2611#un ar FALSE reason "quick mode done (await()"
1w0d: ISAKMP (0:2): Node -1273332908, Input = IKE_MESG_FROM_PEER, 
IKE_QM_EXCH
Old State = IKE_QM_R_QM2 New State = IKE_QM_PHASE2_COMPLETE 

1w0d: IPSEC(key_engine): got a queue event...
1w0d: IPSEC(initialize_sas): ,
(key eng. msg.) INBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 172.18.124..0/255.255.255.0/0/0 (type=4), 
remote_proxy= 10.16.20.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-sha-hmac , 
lifedur= 2147483s and 0kb, 
spi= 0x2359F2EE(593097454), conn_id= 2002, keysize= 0, flags= 0x4
1w0d: IPSEC(initialize_sas): ,
(key eng. msg.) OUTBOUND local= 10.1.1.1, remote= 10.0.0.1, 
local_proxy= 172.18.124.0/255.255.255.0/0/0 (type=4), 
remote_proxy= 10.16.20.2/0.0.0.0/0/0 (type=1),
protocol= ESP, transform= esp-3des esp-shll
All possible debugging has been turned off
vpn2611#a-hmac , 
lifedur= 2147483s and 0kb, 
spi= 0x42FC1D6A(1123818858), conn_id= 2003, keysize= 0, flags= 0xC
1w0d: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.1.1.1, sa_prot= 50, 
sa_spi= 0x2359F2EE(593097454), 
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2002
1w0d: IPSEC(create_sa): sa created,
(sa) sa_dest= 10.0.0.1, sa_prot= 50, 
sa_spi= 0x42FC1D6A(1123818858), 
sa_trans= esp-3des esp-sha-hmac , sa_conn_id= 2003

    Registros del cliente

    Inicie el LogViewer en el VPN Client para ver los registros. Asegúrese de que el filtro está establecido en High para todas las clases configuradas. Este es un ejemplo de salida de registro:

    1 16:48:10.203 03/05/02 Sev=Info/6 DIALER/0x63300002
Initiating connection.

2 16:48:10.203 03/05/02 Sev=Info/4 CM/0x63100002
Begin connection process

3 16:48:10.223 03/05/02 Sev=Info/4 CM/0x63100004
Establish secure connection using Ethernet

4 16:48:10.223 03/05/02 Sev=Info/4 CM/0x63100026
Attempt connection with server "10.1.1.1"

5 16:48:10.223 03/05/02 Sev=Info/6 IKE/0x6300003B
Attempting to establish a connection with 10.1.1.1.

6 16:48:10.273 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID, VID, VID) to 10.1.1.1

7 16:48:10.273 03/05/02 Sev=Info/4 IPSEC/0x63700014
Deleted all keys

8 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

9 16:48:10.994 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID, VID, VID, VID, KE, ID, NON, HASH)
from 10.1.1.1

10 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000059
Vendor ID payload = 12F5F28C457168A9702D9FE274CC0100

11 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000001
Peer is a Cisco-Unity compliant peer

12 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000059
Vendor ID payload = AFCAD71368A1F1C96B8696FC77570100

13 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000001
Peer supports DPD

14 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000059
Vendor ID payload = 2D275A044215F48F531958AB2578EB2D

15 16:48:10.994 03/05/02 Sev=Info/5 IKE/0x63000059
Vendor ID payload = 09002689DFD6B712

16 16:48:11.025 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT) to 10.1.1.1

17 16:48:11.045 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

18 16:48:11.045 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:STATUS_RESP_LIFETIME)
from 10.1.1.1

19 16:48:11.045 03/05/02 Sev=Info/5 IKE/0x63000044
RESPONDER-LIFETIME notify has value of 86400 seconds

20 16:48:11.045 03/05/02 Sev=Info/5 IKE/0x63000046
This SA has already been alive for 1 seconds,
setting expiry to 86399 seconds from now

21 16:48:11.075 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

22 16:48:11.075 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 10.1.1.1

23 16:48:11.075 03/05/02 Sev=Info/4 CM/0x63100015
Launch xAuth application

24 16:48:14.920 03/05/02 Sev=Info/4 CM/0x63100017
xAuth application returned

25 16:48:14.920 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 10.1.1.1

26 16:48:14.990 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

27 16:48:14.990 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 10.1.1.1

28 16:48:14.990 03/05/02 Sev=Info/4 CM/0x6310000E
Established Phase 1 SA. 1 Phase 1 SA in the system

29 16:48:15.000 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 10.1.1.1

30 16:48:15.010 03/05/02 Sev=Info/5 IKE/0x6300005D
Client sending a firewall request to concentrator

31 16:48:15.010 03/05/02 Sev=Info/5 IKE/0x6300005C
Firewall Policy: Product=Cisco Integrated Client,
Capability= (Centralized Policy Push).

32 16:48:15.010 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 10.1.1.1

33 16:48:15.141 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

34 16:48:15.141 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 10.1.1.1

35 16:48:15.141 03/05/02 Sev=Info/5 IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.16.20.2

36 16:48:15.141 03/05/02 Sev=Info/5 IKE/0xA3000017
MODE_CFG_REPLY: The received (INTERNAL_ADDRESS_EXPIRY) attribute and value
(86395) is not supported

37 16:48:15.141 03/05/02 Sev=Info/5 IKE/0x6300000E
MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Internetwork
Operating System Software IOS (tm) C2600 Software (C2600-JK9O3S-M),
Version 12.2(8)T, RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 14-Feb-02 16:50 by ccai

38 16:48:15.141 03/05/02 Sev=Info/5 IKE/0x6300000D
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SPLIT_INCLUDE (# of split_nets),
value = 0x00000001

39 16:48:15.141 03/05/02 Sev=Info/5 IKE/0x6300000F
SPLIT_NET #1
subnet = 172.18.124.0 
mask = 255.255.255.0
protocol = 0
src port = 0
dest port=0

40 16:48:15.141 03/05/02 Sev=Info/4 CM/0x63100019
Mode Config data received

41 16:48:15.151 03/05/02 Sev=Info/5 IKE/0x63000055
Received a key request from Driver for IP address 10.1.1.1,
GW IP = 10.1.1.1

42 16:48:15.151 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 10.1.1.1

43 16:48:15.361 03/05/02 Sev=Info/4 IPSEC/0x63700014
Deleted all keys

44 16:48:15.461 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

45 16:48:15.461 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID,
NOTIFY:STATUS_RESP_LIFETIME) from 10.1.1.1

46 16:48:15.461 03/05/02 Sev=Info/5 IKE/0x63000044
RESPONDER-LIFETIME notify has value of 3600 seconds

47 16:48:15.461 03/05/02 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 4608000 kb

48 16:48:15.461 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 10.1.1.1

49 16:48:15.461 03/05/02 Sev=Info/5 IKE/0x63000058
Loading IPsec SA (Message ID = 0x07E6A9E1 OUTBOUND SPI = 0x0EA6FBC8
INBOUND SPI = 0x3C2B302B)

50 16:48:15.461 03/05/02 Sev=Info/5 IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0x0EA6FBC8

51 16:48:15.471 03/05/02 Sev=Info/5 IKE/0x63000026
Loaded INBOUND ESP SPI: 0x3C2B302B

52 16:48:15.471 03/05/02 Sev=Info/4 CM/0x6310001A
One secure connection established

53 16:48:15.511 03/05/02 Sev=Info/6 DIALER/0x63300003
Connection established.

54 16:48:15.581 03/05/02 Sev=Info/6 DIALER/0x63300008
MAPI32 Information - Outlook not default mail client

55 16:48:16.553 03/05/02 Sev=Info/4 IPSEC/0x63700010
Created a new key structure

56 16:48:16.553 03/05/02 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0xc8fba60e into key list

57 16:48:16.553 03/05/02 Sev=Info/4 IPSEC/0x63700010
Created a new key structure

58 16:48:16.553 03/05/02 Sev=Info/4 IPSEC/0x6370000F
Added key with SPI=0x2b302b3c into key list

59 16:48:26.357 03/05/02 Sev=Info/5 IKE/0x63000055
Received a key request from Driver for IP address 172.18.124.159,
GW IP = 10.1.1.1

60 16:48:26.357 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 10.1.1.1

61 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x6300002F
Received ISAKMP packet: peer = 10.1.1.1

62 16:48:26.668 03/05/02 Sev=Info/4 IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID,
NOTIFY:STATUS_RESP_LIFETIME) from 10.1.1.1

63 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x63000044
RESPONDER-LIFETIME notify has value of 3600 seconds

64 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x63000045
RESPONDER-LIFETIME notify has value of 4608000 kb

65 16:48:26.668 03/05/02 Sev=Info/4 IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 10.1.1.1

66 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x63000058
Loading IPsec SA (Message ID = 0xB41A7B54 OUTBOUND SPI = 0x2359F2EE
INBOUND SPI = 0x42FC1D6A)

67 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0x2359F2EE

68 16:48:26.668 03/05/02 Sev=Info/5 IKE/0x63000026
Loaded INBOUND ESP SPI: 0x42FC1D6A

69 16:48:26.668 03/05/02 Sev=Info/4 CM/0x63100022
Additional Phase 2 SA established.

    Información Relacionada

    Historial de revisiones

    Revisión Fecha de publicación Comentarios
    1.0
    06-Mar-2002
    Versión inicial
    TAC Authored

    Con la colaboración de ingenieros de Cisco

    • chbanks
      ddunlap

    ¿Resultó útil este documento?

    FeedbackComentarios

    Contacte a Cisco

    Este documento se aplica a estos productos