Introduction

This Release Notes identifies changes and issues related to this software release.

Release Lifecycle Milestones

Release Lifecycle Milestone

Milestone

Date

First Customer Ship

FCS

31-Oct-2023

End of Life

EoL

31-Oct-2023

End of Software Maintenance

EoSM

30-Apr-2025

End of Vulnerability and Security Support

EoVSS

30-Apr-2025

Last Date of Support

LDoS

30-Apr-2026

These milestones and the intervals between them are defined in the Cisco Ultra Cloud Core (UCC) Software Release Lifecycle Product Bulletin available on cisco.com.

Release Package Version Information

Software Packages

Version

ccg-2023.04.5.SPA.tgz 2023.04.5
NED package

ncs-5.6.8-ccg-nc-2023.04.5

ncs-6.1-ccg-nc-2023.04.5

NSO

5.6.8

6.1.3

Descriptions for the various packages provided with this release are available in the Release Package Descriptions section.

Verified Compatibility

Behavior Changes for this Release

The following behavior changes are visible in this release.

Handling Peer Delete Log during Reload

Previous Behavior: The application error log was captured even if the ETCD entry was deleted for a valid scenario.

Following is an example of error log where this log is marked as ERROR.

2024/03/08 06:22:38.700 smf-service-6 [ERROR] [MemoryCache.go:446] [infra.memory_cache.core] Reload cache, key C.GR.1.peergtpnodeinfo1.x.x.x.x deleted

New Behavior: The log level of this error log is changed to debug as this log is getting printed in the valid scenario.

Modification in Echo Timer Handling

Previous Behavior: When the SMF received echo request from peer, it reset the local echo request timer, resulting in delayed transmission of echo requests.

New Behavior: For SGW roaming peers, with an echo interval configured at 300 seconds, the SMF now sends echo requests at irregular intervals ranging from 240 to 270 seconds.

The SMF sends these echo requests even if there are incoming GTPv2 messages, including peer echo requests, from SGW.

SGW Peer Detection in Roaming Scenario

Previous Behavior: Roaming S-GW peers were showing as UNKNOWN_PEER in nodemgr logs and not tagged as "Roaming" in the SMF CCG software release 2023.03.m0.d8.0.i45 when seen with show peers all command.

New Behavior: Roaming S-GW peers are tagged as "Roaming" when seen with show peers all command.

Installation and Upgrade Notes

This Release Note does not contain general installation and upgrade instructions. Refer to the existing installation documentation for specific installation and upgrade considerations.

Software Integrity Verification

To verify the integrity of the software image you have from Cisco, you can validate the SHA512 checksum information against the checksum identified by Cisco for the software.

Image checksum information is available through Cisco.com Software Download Details. To find the checksum, hover the mouse pointer over the software image you have downloaded.

At the bottom you find the SHA512 checksum, if you do not see the whole checksum you can expand it by pressing the "..." at the end.

To validate the information, calculate a SHA512 checksum using the information in Table 1 and verify that it matches either the one provided on the software download page.

To calculate a SHA512 checksum on your local desktop, refer to the table below.

Table 1. Checksum Calculations per Operating System

Operating System

SHA512 checksum calculation command examples

Microsoft Windows

Open a command line window and type the following command:

> certutil.exe -hashfile filename.extension SHA512

Apple MAC

Open a terminal window and type the following command:

$ shasum -a 512 filename.extension

Linux

Open a terminal window and type the following command:

$ sha512sum filename.extension

OR

$ shasum -a 512 filename.extension

Note

 

filename is the name of the file.

extension is the file extension (for example, .zip or .tgz).

If the SHA512 checksum matches, you can be sure that no one has tampered with the software image or the image has not been corrupted during download.

If the SHA512 checksum does not match, we advise you to not attempt upgrading any systems with the corrupted software image. Download the software again and verify the SHA512 checksum again. If there is a constant mismatch, please open a case with the Cisco Technical Assistance Center.

Certificate Validation

SMF software images are signed via x509 certificates. Please view the .README file packaged with the software for information and instructions on how to validate the certificates.

Open Bugs for this Release

The following table lists the open bugs in this specific software release.


Note


This software release may contain open bugs first identified in other releases. Additional information for all open bugs for this release are available in the Cisco Bug Search Tool.


Bug ID

Headline

CSCwj36575

SMF echo interval configuration reset during upgrade

CSCwj41844

Observing echo request sent randomly from OBR SMF

Resolved Bugs for this Release

The following table lists the resolved bugs in this specific software release.


Note


This software release may contain bug fixes first introduced in other releases. Additional information for all resolved bugs for this release is available in the Cisco Bug Search Tool.


Bug ID

Headline

Behavior Change

CSCwj27775

High count of etcd DELETE/PUT operations observed when roaming peer sends MBR with RC IE

No

CSCwi19577

Frequent Reload cache peerInfo deleted errors in OAM logs

Yes

CSCwj19242

s11-gtpc-ep2-2 is unable to communicate to cache_pod_1 - error [RPCNoRemoteHostAvailable] Selected

No

CSCwj21675

During incoming DSR and ongoing WIFI to LTE HO, SMF deletes all the PDRs.

No

CSCwj28003

Abort HO not triggered : incoming DSR and onging WIFI to LTE HO await CBRes

No

Operator Notes

Cloud Native Product Version Numbering System

The show helm list command displays detailed information about the version of the cloud native product currently deployed.

The appropriate version number field increments after a version has been released. The new version numbering format is a contiguous sequential number that represents incremental changes between releases. This format facilitates identifying the changes between releases when using Bug Search Tool to research software releases.

Release Package Descriptions

The following table provides descriptions for the packages that are available with this release.

Table 2. Release Package Information

Software Packages

Description

ccg.<version>.SPA.tgz

The SMF offline release signature package. This package contains the SMF deployment software, NED package, as well as the release signature, certificate, and verification information.

ncs-<nso_version>-ccg-nc-<version>.tar.gz

The NETCONF NED package. This package includes all the yang files that are used for NF configuration.

Note that NSO is used for the NED file creation.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, refer to https://www.cisco.com/c/en/us/support/index.html.