This document contains release information for Cisco Firepower eXtensible Operating System (FXOS) 2.13.0.

Use these Release Notes as a supplement with the other documents listed in the documentation roadmap:


Note


The online versions of the user documentation are occasionally updated after the initial release. As a result, the information contained in the documentation on Cisco.com supersedes any information contained in the context-sensitive help included with the product.


Introduction

The Cisco security appliance is a next-generation platform for network and content security solutions. The security appliance is part of the Cisco Application Centric Infrastructure (ACI) Security Solution and provides an agile, open, secure platform that is built for scalability, consistent control, and simplified management.

The security appliance provides the following features:

  • Modular chassis-based security system—Provides high performance, flexible input/output configurations, and scalability.

  • Firepower Chassis Manager—Graphical user interface provides a streamlined, visual representation of the current chassis status and allows for simplified configuration of chassis features.

  • FXOS CLI—Provides command-based interface for configuring features, monitoring chassis status, and accessing advanced troubleshooting features.

  • FXOS REST API—Allows users to programmatically configure and manage their chassis.

What's New

New Features in FXOS 2.13.0.272

Fixes for various problems ( see Resolved bugs in Resolved bugs in FXOS 2.13.0.272)

New Features in FXOS 2.13.0.243

Fixes for various problems ( see Resolved bugs in Resolved bugs in FXOS 2.13.0.243)

New Features in FXOS 2.13.0.212

Fixes for various problems ( see Resolved bugs in FXOS 2.13.0.212)

Cisco FXOS 2.13.0 introduces the following new features:

Feature Description

IPv6 Ready Logo Certification

The following CLIs are added to set certain sysctl.conf variables that will persist after a reboot:

  • set ipv6 enable/disable

  • set nd enable/disable

  • set ipv6-auto eui64

  • set ipv6-auto stablesec

  • set ipv6-ready ipv6-addr <var> ipv6-readyconfig eui64 ipv6-readyprefix <var>

  • set ipv6-ready ipv6-addr <var> ipv6-readyconfig stablesec ipv6-readyprefix <var>

The show ipv6-if output is updated to display the following fields:

  • Autocfg-method

  • Readycfg-method

  • IPv6 state

  • ND state

Memory leak detection in MIO

You can now debug the memory leak of each process using the scope mem-leak-logging command.

Memory leak detection in Secure Firewall 3100

You can now debug the memory leak process by enabling the mem-leak-feature.

Single image for Secure Firewall 3100

To reimage your Secure Firewall 3100 device to FTD 7.3.0 version, you must have ROMMON version 1.1.08 or above. If the current ROMMON version is less than 1.1.08, you must upgrade ROMMON by upgrading to ASA 9.19 or later. Or using FMC or FDM to upgrade FTD to 7.3.0.

FTD configuration using CDO

You can now configure FTD device using CDO.

Software Download

You can download software images for FXOS and supported applications from one of the following URLs:

For information about the applications that are supported on a specific version of FXOS, see the Cisco FXOS Compatibility guide at this URL:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html

Important Notes

  • In FXOS 2.4(1) or later, if you are using an IPSec secure channel in FIPS mode, the IPSec peer entity must support RFC 7427.

  • Firmware Upgrade—We recommend upgrading your Firepower 4100/9300 security appliance with the latest firmware. For information about how to install a firmware update and the fixes included in each update, see https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/firmware-upgrade/fxos-firmware-upgrade.html.

  • When you upgrade a network or security module, certain faults are generated and then cleared automatically. These include a “hot swap not supported” fault or a “module removed when in online state” fault. If you have followed the appropriate procedures, as described in the Cisco Firepower 9300 Hardware Installation Guide or Cisco Firepower 4100 Series Hardware Installation Guide, the fault(s) are cleared automatically and no additional action is required.

  • Beginning with version 2.13, the following platforms are unsupported:

    • Firepower 9300 SM-24 security module

    • Firepower 9300 SM-36 security module

    • Firepower 9300 SM-44 security module

    • Firepower 4110

    • Firepower 4120

    • Firepower 4140

    • Firepower 4150


    Note


    You will recieve an error when installing or running threat defense intances on these platforms running with FXOS 2.13. We recommend you to use the supported FXOS version or change the hardware. For more information on FXOS versions and supported hardwares, see Cisco Firepower 4100/9300 FXOS Compatibility.


  • From FXOS 2.13 release, the set maxfailedlogins command no longer works. The value can still be set, but if you try to log in a greater number of times than the already set value with an invalid password, you are not locked out. For compatibility, a similar command, set max-login-attempts, is available under scope security. This command also prevents logging in after a certain number of failed attempts but sets the value for all users. These commands are only available for Firepower 2100 platform mode and do not affect other platforms.

System Requirements

  • You can access the Firepower Chassis Manager using the following browsers:

    • Mozilla Firefox—Version 42 and later

    • Google Chrome—Version 47 and later

    • Microsoft Internet Explorer—Version 11 and later

    We tested FXOS 2.13.0 using Mozilla Firefox version 42, Google Chrome version 47, and Internet Explorer version 11. Other versions of these browsers are expected to work. However, if you experience any browser-related issues, we suggest you use one of the tested versions.

Upgrade Instructions

You can upgrade your Firepower 9300 or Firepower 4100 series security appliance directly to FXOS 2.13.0 if it is currently running FXOS version 2.2(2) or later. Before you upgrade your Firepower 9300 or Firepower 4100 series security appliance to FXOS 2.13.0, first upgrade to FXOS 2.2(2), or verify that you are currently running FXOS 2.2(2).

For upgrade instructions, see the Cisco Firepower 4100/9300 Upgrade Guide.

Installation Notes

  • An upgrade to FXOS 2.13.0 can take up to 45 minutes. Plan your upgrade activity accordingly.

  • If you are upgrading a Firepower 9300 or Firepower 4100 series security appliance that is running a standalone logical device or if you are upgrading a Firepower 9300 security appliance that is running an intra-chassis cluster, traffic does not traverse through the device while it is upgrading.

  • If you are upgrading a Firepower 9300 or a Firepower 4100 series security appliance that is part of an inter-chassis cluster, traffic does not traverse through the device being upgraded while it is upgrading. However, the other devices in the cluster continue to pass traffic.

  • Downgrade of FXOS images is not officially supported. The only Cisco-supported method of downgrading an image version of FXOS is to perform a complete re-image of the device.

Resolved Bugs in 2.13.0

The resolved bugs for this release are accessible through the Cisco Bug Search Tool. This web-based tool provides you with access to the Cisco bug tracking system, which maintains information about bugs and vulnerabilities in this product and other Cisco hardware and software products.


Note


You must have a Cisco.com account to log in and access the Cisco Bug Search Tool. If you do not have one, you can register for an account.


For more information about the Cisco Bug Search Tool, see the Bug Search Tool Help & FAQ.

Resolved bugs in FXOS 2.13.0.272

The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.13.0.272:

Identifier

Headline

CSCwh78361

KP/WM: Getting \"RotatingLogProvider: Internal Error:\" after login  to the device

CSCwb84967

FPR4K/FPR9K: Generating FXOS Chassis show tech may result to flap of 40Gig Netmod Port

CSCwc82169

FPR4100/9300 High traffic redirected to CPU causes internal communication failure with blade adapter

CSCwd35074

Telemetry registration is failing in 2.13.

CSCwe89256

Firepower Chassis Manager is not accessible with ECDSA certificates

CSCwf43324

WM1010: \"Show techsupport fprm brief\" is taking more time (approx 15 mins)  than expected

CSCwf57856

FXOS Traceback and reload caused by leak on MTS buffer queue

CSCwf88124

Switch ports in Trunk mode do not pass vlan traffic after power loss

CSCwh01521

Remove iotop.cfg from meta-local-dev linux-yocto.bbappend

CSCwh02371

CCM ID 53 - WR8, LTS18, LTS21

CSCwh09113

FPR1010 in HA failed to send or receive to GARP/ARP with error \"edsa_rcv: out_drop\"

CSCwh15636

ARP learning issues with Multiple-instance running 100G Netmod

CSCwh17366

Upgrade to CiscoSSH 1.12.39 in FXOS

CSCwh19613

ASA crashed with Saml scenarios

CSCwh22916

CCM ID 54 - WR8, LTS18, LTS21 update -- (BREAKS LTS21 while WR8 and LTS18 are good)

CSCwh43230

Strong Encryption license is not getting applied to ASA firewalls in HA.

CSCwh55178

FXOS: svc_sam_dcosAG process getting crashed repeatedly on FirePower 4100

CSCwh58077

Jitterentropy changes in LTS18 and later branches causing FTD build failure

CSCwh99041

CCM seq 57 - LTS21

CSCwi01323

SNMP OID ifOutDiscards on MIO are always zero despite show interface are non-zero

CSCwi34600

SSH key-based login is not working in ASAv loaded with default config on GCP

CSCvx44261

SNMPv3: Special characters used in FXOS SNMPv3 configuration causes authentication errors

CSCwc60800

CIAM: linux-kernel 5.10.79 CVE-2022-30594

CSCwc65508

CIAM: libtirpc - CVE-2021-46828

CSCwc76419

Unnecessary FAN error logs needs to be removed from thermal file

CSCwc78220

CIAM: zlib - CVE-2022-37434

CSCwd22389

Vulnerabilities in sqlite - CVE-2022-35737 and others

CSCwd81123

High CPU Utilization on FXOS for processes smConlogger

CSCwe21884

Write wrapper around \"kill\" command to log who is calling it

CSCwe42949

Install the 'perf' tool as part of the FXOS for FTD.

CSCwe70472

Upgrade third-party component rng-tools to latest 6.16 version

CSCwe81837

FXOS: need add tracefs into release build

CSCwf22483

SSH to Chassis allows a 3-way handshake for IPs that are not allowed by the config

CSCwf36066

WM/TPK/WA \"FTD only\": Packet drops observed after removing PC member from Port-channel

CSCwf38253

Add iotop to FXOS branches before FXOS 2.14

CSCwf44354

JENT: Expand JENT library support to CiscoSSL for all FXOS targets

CSCwf63589

FTD snmpd process traceback and restart

CSCwf78950

FMC process ssp_snmp_trap_fwdr high memory utilization

CSCwf79552

Avoid RADWARE start failure in FXOS 2.13 starting in June 2024

CSCwf85946

Debug logging command  tcam option is not working on wm1010

CSCwf92512

Fxos.sh in branches before R2140 is missing the fxos-compat volume

CSCwf95288

FPR1k Switchport passing CDP traffic

CSCwf98469

Remove old iotop 0.6 version

CSCwf99303

Management UI presents self-signed cert rather than custom CA signed one after upgrade

CSCwh03488

Error while Clean up phy port mapping for all ports in TPK

CSCwh06501

FTD SSH External authentication shows \"pam_radius verify_packet: Bad code\" 7.4.0-1928

CSCwh22888

FXOS: Remove enforcement of blades going into degraded state after multiple DIMM correctable errors

CSCwh30174

Commit-buffer should not be disabled in appliance mode for UCSM memory leak detection feature

CSCwh35137

During secure erase reboot process, observed an ERROR : Timeout Waiting for fxos_log_shutdown.

CSCwh70735

Add the jemalloc library to the FTD units

CSCwh91941

In LTP debug mode while doing 'show_mgmt_port' missing inet address

CSCwi20690

Revmove Local HTMLDOC Recipe

CSCwi24668

CCM Seq 59 - LTS21

CSCwi26273

WM RM:100% System CPU usage for Core 0 on WM platform

CSCwe34512

JENT: Add JENT library to fxos to support KP.

CSCwf36750

Upgrade the lldpd component to version 1.0.16

CSCwh08839

Remove local patch CSCwh06501.patch once it is managed by CCM

CSCwh71202

Update FXOS CIAM scripts

CSCwh99707

Update CIAM scripts to include CVE ID in arttributes and add WR_CASE_PENDING attribute

CSCwi49448

Update CCM Layer Infrastructure

CSCwi61028

FXOS CIAM Bug Filling Script Fails to wait for Bug to be Filed

CSCwf33115

Add support for 7zip into FMC

CSCwh33196

SSP MIO: Swims Token support in signing image

CSCwh58010

Backout CL3419025 from fxplatform/liverpool/FXOS_2_10_1

Resolved bugs in FXOS 2.13.0.243

The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.13.0.243:

Identifier

Headline

CSCwe95747

724-118: portmgr_discover_epm: Card discovery failure - failed to detect EPM card type.

CSCvx99187

Failing to set DNS, hostname and IP on TPK 3130.

CSCwc83495

Add abort in switch_driver to crash portmanager in case udbs are corrupted.

CSCwd10822

Failover trigger due to Inspection engine in other unit has failed due to disk failure.

CSCwd34288

FP1000 - During boot process in LINA mode, broadcasts leaked between interfaces resulting in storm.

CSCwd72680

FXOS: FP2100 FTW timeout triggered by high CPU usage during FTD Access Control Policy deploy.

CSCwd74839

30+ seconds data loss when unit re-join cluster.

CSCwd89349

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (seq 42).

CSCwd90894

ASA: After upgrade cannot connect via ssh to interface.

CSCwd94183

Blade not coming up after FXOS update support on multi-instance due to ssp_ntp.log log rotation prob.

CSCwd96493

Link Up seen for a few seconds on FPR1010 during bootup.

CSCwd99813

Supervisor does not reboot unresponsive module/blade due to CATERR with minor severity sensor ID 50.

CSCwd99885

Bad code change to portmgr_ipc.c.

CSCwe13615

Application Instance fails install sporadically.

CSCwe15477

TPK MGMT Port not able to ping gateway after application installation.

CSCwe22176

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 43).

CSCwe24532

Multiple instances of nvram.out log rotated files under /opt/cisco/platform/logs/.

CSCwe25593

Read factory reset register twice as workaround for random factory reset.

CSCwe30653

FTD upgrade failure at "999_finish/999_zz_install_bundle.sh" due to bad key cert.

CSCwe30867

Workaround to set hwclock from ntp logs on low end platforms.

CSCwe32394

ssp abort/reload: terminate called after throwing an instance of 'Stb::bad_alloc' from overload.cpp.

CSCwe33130

Supervisor does not reboot unresponsive module/blade due to IERR with minor severity sensor ID 79.

CSCwe39425

2100: Power switch toggle leads to ungraceful shutdowns and "PowerCycleRequest" reset.

CSCwe46036

FP1K/2K/3K devices unable to receive unicast traffic.

CSCwe51412

Port-channel down with Suspended status on member-ports.

CSCwe59809

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (seq 45).

CSCwe64773

core.svc_sam_dcosAG file seen on device after erase configuration.

CSCwe72535

Unable to login to FTD using external authentication.

CSCwe74059

logrotate is not compressing files on 9.16 ASA or 7.0 FTD.

CSCwe74916

Interface remains DOWN in an Inline-set with propagate link state.

CSCwe83544

After upgrade ha interface remains down on one node.

CSCwe88600

vFTD sshd silent crash, possibly due to probes in Azure with LB.

CSCwe89731

Notification Daemon false alarm of Service Down.

CSCwe93802

WR6, LTS18 and LTS21 commit id update in CCM layer (Seq 46).

CSCwf01306

WM : Lina core file is truncated.

CSCwf02779

After ASA upgrade device going to failsafe with error"fxos_api_xml_decode: XML_Parse return error".

CSCwf03714

Back out FXOS changes made to CSCwd89848 to avoid build compatibility issue between FXOS and LINA.

CSCwf04983

3100 unit failed to join the cluster with error "configured object (sys/switch-A/slot-2) not found".

CSCwf08515

FPR3100: ASA/FTD High traffic impact on all data interfaces with high counter of "demux drops".

CSCwf14729

Need to use CiscoSSL with FOM 7.3 for Intel Builds.

CSCwf17858

node is leaving TPK cluster due to interface health check failure.

CSCwf18428

KP/WM: Management interface operation state is still up even after "shut" command.

CSCwf18875

SSH login not working after upgrading from 99-18-1-186 to 99-20-0-245.

CSCwf51933

FTD username with dot fails AAA-RADIUS external authentication login after upgrade.

CSCwf59098

LTS21 commit id update in CCM layer (Seq 49).

CSCwf59643

[IMS_7_4_0] KP HA disabled after reboot: CD App Sync error Failed to apply SSP config on standby.

CSCwf65396

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 50).

CSCvx71936

FXOS: Fault "The password encryption key has not been set." displayed on FPR1000 and FPR2100 devices.

CSCwb23251

sspos_snmp_suba core seen during longevity test on FP1K.

CSCwb67524

TPK: failed to show open-network-ports in container deploymode.

CSCwc10545

system_pid_specific_misc_defs.json has incorrect system cores for TPK.

CSCwc34801

[IMS_7_3_0]REST_API:Network::getMTU [ERROR] when setting network information during firstboot.

CSCwc69977

Null pointer check missing in sfp display routine.

CSCwc83851

OIR errors in portmgr.out.

CSCwd07098

25G CU SFPs not working in Brentwood 8x25G netmod.

CSCwd10880

critical health alerts 'user configuration(FSM.sam.dme.AaaUserEpUpdateUserEp)' on 2100/3100 devices.

CSCwd43666

Analyze why there is no logrotate for /opt/cisco/config/var/log/ASAconsole.log.

CSCwd53448

FPR3100: 4x40 network module LEDs do not blink with traffic.

CSCwd56266

KP- FTP under local-mgmt not working.

CSCwd56462

LLDP:Neighbors not getting discovered on the first breakout port without deleting the lldp config.

CSCwd59785

Use freeradius-client provided by Wind River.

CSCwd59807

Use ghostscript-fonts provided by Wind River.

CSCwd67101

FPR1150 : Exec format error seen and the device hung until reload when erase secure all is executed.

CSCwd68159

LLDP::Removing a member port from the port channel completely removes the lldp neighbors.

CSCwd70490

Port-channel member port status flag and membership status are Down if LACPDUs are not received.

CSCwd80343

MI FTD running 7.0.4 is on High disk utilization.

CSCwd82787

Upgrade request errors flood portmgr.out after netmod removal.

CSCwd92804

FAN LED flashing amber on FPR2100.

CSCwe00662

Create local_User is not getting locked even after setting maximum-login attempts.

CSCwe02421

FPR-X-NM-6X1SX-F not recognized on FP3100 or FP4200.

CSCwe21569

Improve CLI options for management IP with dhcp option.

CSCwe22152

SNMPD cores seen in in snmp_sess_close and notifyTable_register_notifications.

CSCwe22302

Partition "/opt/cisco/config" gets full due to wtmp file not getting logrotated.

CSCwe25314

Refresh the ios.pem.

CSCwe32972

stdout_env_manager.log is full of Unknown board type 3 messages.

CSCwe33699

stdout_00aa_ssp_syslog.log is full of crond is running messages.

CSCwe36758

3105: F78672 after a reboot.

CSCwe47278

SSH External authentication shows "pam_radius verify_packet: Bad code" using radius 7.4.0-1672

CSCwe48918

LTS18 CCM Sequence number 44 to update the libjitterentropy to version 3.4.1.

CSCwe49436

WM default log level is set to critical.

CSCwe50946

Management interface link status not getting synced between FXOS and ASA.

CSCwe50993

SNMP on SFR module goes down and won't come back up.

CSCwe53429

Block "create device-manager" command under ASA/FTD native mode.

CSCwe63794

Reduce fault severity level for RAID degrade due to disk is still in spare state.

CSCwe72322

Weekly Coverity System SA warnings 2023-03-20, Coverity Defects 878323.

CSCwe73070

On WA/TPK when management1/1 is down, lina diagnostic in both CMI/non-CMI mode is UP.

CSCwe81114

TPK-CCmode: Error: tamm_espi_read 0, 0xb2c000: 769-TAM_ERROR_DEVICE_NOT_REGISTERED.

CSCwe81695

logger.1: send message failed: Resource temporarily unavailable logs were seen after reload 7.2.4-94.

CSCwe83962

LLDP::Neighbors info is not getting discovered on all the member port of a port channel interface.

CSCwe90524

Enh: Add timestamp in interface IPC message.

CSCwe93202

FXOS REST API: Unable to create a keyring with type "ecdsa".

CSCwe93736

ASA not updating Timezone despite taking commands.

CSCwe96450

2100: Check poshd running state FXOS 2.13/2.14 for Power switch toggle graceful shutdowns.

CSCwf03241

Lost Management access to 3110 (Native mode).

CSCwf03490

portmanager.sh outputing continuous bash warnings to log files.

CSCwf06042

Speedcap of PC member interfaces not updated post EPM OIR.

CSCwf11877

TPK 3110 - Firmware version MISMATCH after upgrade to 7.2.4-144.

CSCwf12814

LTS21 python3-funcsigs build issue.

CSCwf21669

Need jemalloc library in windriver OS.

CSCwf22887

FXOS: show portchannel summary shows incorrect interfaces when using breakout ports.

CSCwf35385

Fix CiscoSSL Recipe Name in R2130.

CSCwf36083

Display SNMP Debug menu 4 command as part of show-tech fprm for FTD.

CSCwf37887

Move to go 1.19.4 in LTS21 Branches.

CSCwf40113

TPK/WA - OSPF packets land in multiple RX rings.

CSCwf43140

port-manager: The devNum 0 has not initialized the fwd module.

CSCwf43817

KC25/KC50 support for 0x500_000a firmware.

CSCwf50358

FCM: jacoco lib needs upgrade.

CSCwf59176

FXOS raises a fault for administratively disabled management interface.

CSCwf60483

DME log flooding in certain scenario.

CSCwf73773

RMU Dump capture missing code.

CSCwf75568

Livecore changes to support live snapshot feature.

CSCwf80895

LTS21 commit id update in CCM layer (Seq 52).

CSCwb05555

Brentwood and Maryland squelch settings modification.

CSCwe24440

disk-controller remove/remove-secure description doesn't match.

CSCwe33273

3100: Insmod Errors observed on console.

CSCwf18647

Brentwood and Maryland squelch settings modification missing from _X netmod variants.

CSCwf18655

Universal p4tickets are in plaintext in source code.

CSCwf55787

Rework CiscoSSL Recipe.

CSCvz69950

ENH: Include output of 'show storage detail' command in FPR3100 FPRM/tech_support_brief file.

CSCwb06934

ENH: Include output of 'show slot expand detail' command in FPR3100 tech_support_brief file.

CSCwc12716

modify tech-support to capture additional debug info (control link register details).

CSCwd83015

TPK/WA enh - add Marvell LuaCLI "show tail-drop-allocated buffers all" to tech-support.

CSCwe42455

switch diagnostic enhancement default event configuration.

CSCwe69220

Update Corona CIAM scripts.

CSCwe73826

ENH: Include Ethernet port ID in "show portmanager switch status".

CSCwe79517

ENH: TPK show portmanager counters to dump counters for default drop rules.

CSCwe87873

Requirement: Log rotate utility needs to handle the rotating of the asa-appagent.log file.

CSCwe89534

Enable debug logging for switch driver WM-1010.

CSCwf03345

Recovery from RMU failures due to control link going to bad state.

CSCwf23077

ENH: Migrate fover trace logging log rotation to FXOS logrotate utility.

CSCwf23213

WM RM - Switch Diagnostics - events, logging & action.

CSCwf49700

wa/tpk: FXOS changes for unified pkt-capture support for capturing switch dropped packets.

CSCwf79947

Fix firmware packing tools build issue due to python version change.

CSCwd90889

Perforce upgrade requires changes where P4PORT is being set.

CSCwe58542

removal of hash at the end of the marvel build.

Resolved bugs in FXOS 2.13.0.212

The following table lists the previously release-noted and customer-found bugs that were resolved in FXOS 2.13.0.212:

Caveat ID Number

Description

CSCwd34662

LTS18 and LTS21 commit id update in CCM layer (seq 39)

CSCwd47481

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 40)

CSCwd65327

WR6, WR8, LTS18 and LTS21 commit id update in CCM layer (Seq 41)

CSCwe09956

cdc_ether.ko missing from LTS21 based FMC builds

CSCwd21325

FPR 3100: the 'show local-user detail' with unexpected "Error opening the tally file"

CSCwb66175

MIO is not able to register. appAG process issue

CSCwc50267

MIO LTS21: Prune redundant libcurl.so.4.7.0

CSCwd06758

No input validation for logical device DNS servers in bootstrap configuration on chassis manager

CSCwd47340

Potential memory leak in svc_sam_envAG process

CSCwd50036

WA_B/TPK. Dual range(10/25) SFP is not working with 8*10g netmod with sfp-detect speed

CSCwd56654

Platform faults related to management interface

CSCwd74282

3100 enters failsafe mode due to NPU version mismatch

CSCwb52656

SNM trace logs have incorrect timestamps

CSCwc38333

Local disk-0 displayed on fpr9300

CSCwb89257

Remote user login via SSH access with password authentication method fails after FXOS upgrade

Online Resources

Cisco provides online resources to download documentation, software, and tools, to query bugs, and to open service requests. Use these resources to install and configure FXOS software and to troubleshoot and resolve technical issues.

Access to most tools on the Cisco Support & Download site requires a Cisco.com user ID and password.

Contact Cisco

If you cannot resolve an issue using the online resources listed above, contact Cisco TAC:

Communications, Services, and Additional Information

  • To receive timely, relevant information from Cisco, sign up at Cisco Profile Manager.

  • To get the business impact you’re looking for with the technologies that matter, visit Cisco Services.

  • To submit a service request, visit Cisco Support.

  • To discover and browse secure, validated enterprise-class apps, products, solutions and services, visit Cisco Marketplace.

  • To obtain general networking, training, and certification titles, visit Cisco Press.

  • To find warranty information for a specific product or product family, access Cisco Warranty Finder.